Easy Rail System Connector

Images:

$1.97

Product:

One

Finish:

Nature

Material :

Brass

Application:

Easy Rail

Two

Three

Installation:

Installation is very easy!
We recommend a System Connector or System Locator every 12 inches.
After determining where your rails will connect, simply mark where your screws will be going, drill any necessary holes, insert your anchor, drop your screw through the System Connector, and screw your screw securely into the anchor.
Once your System Connector is secure and your System Locators are installed as well, simply insert the top edge of the Easy Rail Track into the top edge of the System Connector, then push the bottom of the Track into place on the bottom of the connector.
Now you are ready to hang your art!

Four

Installation Hardware:

None Needed!

Tools Required:

None Needed!

Weight:

0.2 lb

Short Description:

If you are installing multiple Easy Rails end-to-end, then we suggest using a Easy Rail Connector to connect two rails at their shared end for a perfectly flush connection. Drop a #6 screw through and screw it into your anchor easily.

Description:

The Easy Rail System Connector is designed for use with multiple rails end to end. The System Connector is used instead of a System Locator. One end of each adjacent rail will clip to either half of this connector. Thanks to the easy installation process you can have an exhibit displayed anywhere you would like in no time! If you look below you will notice technical descriptions about this particular item.

Drawing:

CTC100.pdf

Best Seller:

Website:

Patented:

Apply Handling and Packing Fee: